I just bought a 97 Road King that needed an engine. I ended up finding a 91 FXR engine to swap. I pulled my motor out of the road king and noticed the mounting for the oil filter housing / other parts were different. What’s the difference between these to motors? Is there a lot involved in making it work?
Passthapookie
Check the breather fitting on the rear of the crankcase just inboard of the oil pump, is there enough room or will it hit something?
The fitting can be replaced by common hardware store items,, 1/8" pipe thread is the thread in the crankcase, 3/8" is the hose end...
Usually 2 seperate pieces are necessary... route the breather hoses as you would a 91.., the top breather came out in a mid year introduction in mid 92..
Usually 2 seperate pieces are necessary... route the breather hoses as you would a 91.., the top breather came out in a mid year introduction in mid 92..
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
