V-Twin Forum banner

will a 2" intake valve fit....

1801 Views 10 Replies 6 Participants Last post by  Mother
in a stock casting head? Will the chamber need to be modified to un-shroud the valve? the castings are from '02
1 - 2 of 11 Posts
Sure, have a 2.08 in my 04 castings now. Seat change and a bunch of other work, but doable if the port supports it.
1 - 2 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.