[Mother]

in a stock casting head? Will the chamber need to be modified to un-shroud the valve? the castings are from '02

 

[mor pwr]

Mother, I noticed that you have the Leineweber T7 cams in your 98 cu. in. engine. I have been a Leineweber fan for about 25 years. I put the T5sg cams in an 98 inch this past summer the customer really loves them. I'm doing a 117 cu. in. to mine and going to run the T7sg cams. Just wondering how you like your cams in a 98 cu. in. engine.

 

[TXCHOP]

Sure, have a 2.08 in my 04 castings now. Seat change and a bunch of other work, but doable if the port supports it.

 

[TXCHOP]

 

[Mother]

Mor pwr, I ran the t-3's, t-5's, and now the t-7's. I absolutely LOVE the t-7's. Pulls real hard from 2,600 or so all the to .....well i stop at 6,800.

 

[Mother]

TXCHOP, how big is the exhaust valve? What was the other work(sinking the valves to maintain v-v clearance?)? I will be changing the seat for the Ti valves.

 

[harley 103]

I have 2.06 I & 1.570 E valves in a set of 07 heads on a 124 flow at 600 L 311 on I & 219 E 130 Hp 140 Tq.

 

[strokerjlk]

I have 2.06 I & 1.570 E valves in a set of 07 heads on a 124 flow at 600 L 311 on I & 219 E 130 Hp 140 Tq.

ann att rite err is a bad muther........sweet motor...:clap:

 

[Don Dorfman]

Smart man, 2.06 and 1.57
S&S uses 2" & 1.6" on that motor and it is a mild port job and mill from 150hp with their heads

 

[harley 103]

Jim i need to get back up to do a final tune i haven't decided on which pipe to go with the Bassani RR is way to loud. I may try the Trapp discs in the RR.

 

[Mother]

going with a 2" intake and will finalize exhaust valve size soon, currently 1.615"