V-Twin Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
63 Posts
Discussion Starter · #1 ·
I recently had a frame swap on my bike. (long story, lets just say be carefull what kind off frame you have) but the shop that did my work must not have properly tightend the bolt that connects the forks to the frame. I was a little unsure of the work so I marked it with a sharpie and sure enough it vibrates loose about 1/4 turn. I was looking through the Harley manual and I dont see anything that seems to match my situation. Does anyone know the torque rating and am I supposed to use thread lock as well? I would bring it back to the shop but I already lost 6 weeks of riding so far this summer and am a fair wrench myself. Thanks for any info...
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top