V-Twin Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I have a 97 softail classic. It’s laced front wheel has a 6 inch wide hub. I have a wheel I picked up from a flea market that has all the same measurements except the hub width. The new one is 4 inch’s. How do I keep the wheel in the center of the forks,and still have the rotor line up with the caliper? Can I use two spacers per side? I was hoping to use an extra 1inch spacer on each side.
 
1 - 1 of 1 Posts
Top