V-Twin Forum banner

V-Twin Forums Ride of the Month 2017 Event 5

9730 Views 97 Replies 22 Participants Last post by  Dannyboy58
OK here it is, the fifth V-Twin Forums Ride of the Month event for 2017.

In keeping with the previously voted on format, this month is an open event. Any V-Twin scooter can be entered. Long as you own it, it plays.

So now it's riding season more or less across all of the states, so there should be plenty of riders out and about. So take a photo or two and enter em up.

Just to make things sporting, this month the 2nd and 3rd place entries will carry over to the end of year events. That three scooters moving into the run off rounds.

As always, please remember to format those entries properly. And keep comments on topic in the entry thread. Don't re-post entry photos in your quotes. Save the fun and harassment for the poll threads.

Year:
Model:
Eng size:
Transmission(5sp, 6sp etc):
Pipes:
Seat:
Wheels:
And the story:
Photo(s)
You can use these as inspiration.
Example of a simple entry with one photo: http://www.v-twinforum.com/forums/4941906-post2.html
1 - 2 of 98 Posts
OK , let the good luck roll!

My 1997 FLHPi , ex-Police Roadking.



Bought on Ebay a few years back. Didn't look so good at the time. Motor is basically stock 80 cu.in. Evo , except for;

Andrews EV-27 cam
V&H Big Shot Tru-Duals w/fishtails
Dyno-jetted Keihin CV-40 replacing the stock M-M FI
Dyna 2000i ignition
HD Badlander solo seat (have P-pad)
braided brake lines
fresh sneakers , black powder-coated wheels and floating rotors are waiting to be installed

I did some remodeling to add docking brackets so I could use Tour-Pak , rack , passenger backrest , whatever.
See less See more
Ahhhh....the stepchild of the shovelhead world...the 5 speed rubber mount shark nose FLT......one of the ugliest and best travelin shovels ever....a great example no less....well done.
And a big Evo will bolt right in! :clap:
1 - 2 of 98 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top