V-Twin Forum banner

1 - 16 of 16 Posts

·
Super Moderator
Joined
·
19,940 Posts
Discussion Starter #1
Here we are at the beginning of spring and it's already time for the 4th event in the 2017 V-Twin Forums Ride of the Month.

This month is our second special of the year, and by popular vote brings us to Pans, Knucks, and Flaties. No fake pans or knucks (valve cover treatments) allowed, but reproductions are fine.

Pan heads and older. Including newer customs built with oem style early motors. No fakes and such.
So with that little bit of clarification out of the way, lets get started. Enter em up if you're lucky enough to have em.

And as always, please remember to format those entries properly.

Year:
Model:
Eng size:
Transmission(5sp, 6sp etc):
Pipes:
Seat:
Wheels:
And the story:
Photo(s)
You can use these as inspiration.
Example of a simple entry with one photo: http://www.v-twinforum.com/forums/4941906-post2.html
Example of a more elaborate entry: http://www.v-twinforum.com/forums/5192537-post5.htm[/QUOTE]
 

·
The Best Me I Can Be
Joined
·
22,465 Posts
It's the scooter that wins, not the owner.

Several people have had more than one scooter that won a monthly.

But seriously, this conversation should be in another thread, this is an entry thread.
Sorry. You're right. Thanks. Feel free to delete.

joe
 

·
Registered
Joined
·
1,009 Posts
We're baaack!

Pulled it before , but I'm not pulling it again. :hystria:

I'll put my 1950 (titled) Panhead chopper out again.



STD cases and heads.
93cu.in. S&S HC Sidewinder kit.
Andrews C cam & Jims lifters
Baisley roller rockers.

Sputhe 5in4 trans case filled with Andrews gears.
Barnett Scorpion clutch
Primo 3in belt drive
Kick start ONLY!

Paughco rigid wishbone frame
1980 HD wide glide +4in forks
GMA brakes
Paughco pipes.
Twisted spoke wheels , 4in rear , 3in front.

Built this bike in my head , then , over several year , in my living room as I gathered the parts and mended up some broken bones.

 

Attachments

·
Super Moderator
Joined
·
19,940 Posts
Discussion Starter #12
So all we have is the one?

Seriously, there is a runner up slot for the Ride Of The Year runner up poll left for grabs here. One of the 8 runner ups will move on to the Ride of the Year.

There must be one more member out there willing to make a run at it.
 

·
Registered
Joined
·
16,125 Posts
I'm pretty sure we have more pans/knuckles/flats than one on the board. Where are they?
 

·
Super Moderator
Joined
·
19,940 Posts
Discussion Starter #14
That's a wrap the 50 Pan Head belonging to pb68slab is the winner of event 4.

And the runner up is.........Oh well. Someone missed the chance to slip right into a runner up[ run off slot.
 
1 - 16 of 16 Posts
Top