V-Twin Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
1,475 Posts
Would not hurt for a wile, run the baffles. You can check the idle mix screw, the plug can be drilled out useing a 90 deg drill and a small 1/8" bit without carb removeal, you can richen up the slow speed circit from the get go & when you rejet the plug is already out.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top