V-Twin Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
12 Posts
replacing speedo

I have a 2000 FXST and i recently changed my tank to a daytec with smooth top...pop up cap...etc.. I replaced my stock speedo with a Dakota Digital HLY 3014...2 1/16 mini round speedo. After hooking up all wires, I had two that had no home. A white with green stripe and black with green stripe. The white with green stripe wire came out of my stock speed as "speed signal out "and returned to the turn signal canceller. the black with green stripe was running from the speedo check enginge light to the ignition module, black side, as a ground i suppose.
Anyway, after calibrating the Dak Dig speedo, my turnsignals wont work.
Any one have any Ideas?
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top