Looking at replacing my 03 TC88 speedo, why won't the turn signals work when the speedo is removed? Will aftermarket speedos address this if I replace the speedo, i.e. the dakota digital or Wire Plus units? Thanks - Peter
Thanks for the reply, I screwed up, when I initially tested with the speedo removed, I had the ignition in the accessory position, for the turn signals to work, you have to be in the run setting. The perils of having a beer while you working on your scoot...
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.