Tire/Wheel Conversion
Join the discussion
Recommended Reading
-
FXR Swingarm Upgrade Project
Wheels, Tires, Brakes and SuspensionI finally got my swingarm on my 87 FXRC dismounted. I decided it was high time I reinstalled my belt drive. But then I decided I should upgrade the swingarm since H-D hadn't done the best job in designing it in the first place. The rectangular tubing isn't such a good idea and it tends to get...- 11
- 228
-
kdkerr2 · updated
-
Wheel balancing w or w/o pulley/disc
Wheels, Tires, Brakes and SuspensionI'm getting a new rear tire. Goin to tear the wheel down on sunday and leave it to the shop on monday morning. I did also order a (dynamic) wheel balancing. Shop is closed now, and I'm not sure if I need to take off the drive belt pulley and/or the the brak disc from the wheel for the wheel...- 10
- 4K
-
Front master cylinder
Wheels, Tires, Brakes and SuspensionI have a 1996 flhtp and I got a front take off master cylinder off an 06, I rebuilt it put it on the bike, bled the system out but the lever will not go all the way back after you let it off, when I pull in on the lever it is firm. I used a drag specialties rebuild kit, should I have used a...- 15
- 257
-
Terry Cable Suspension
Wheels, Tires, Brakes and SuspensionHello, This is Tony with Terry Cable Suspension, Just a check in to let you know we are here to help you and answer any questions you may have about the suspension on your Harley Davidson Motorcycle. We have been in business over 40 years in Hesperia California, and build all of our shocks and...- 0
- 114
-
2013 FLHX REAR MOUNTS.
Wheels, Tires, Brakes and SuspensionLooking at the service manual it only talks of removing the rear fork. Not wanting to do that. Is it necessary to do all of that or can the pivot shaft be slid side to side to remove the mounts one at a time after supporting the transmission?- 2
- 117
Join now to ask and comment!