V-Twin Forum banner
1 - 2 of 2 Posts

54 Posts
I installed Thunderheader on my 03 Electraglide. I used S/E gaskets and they
were too thin so I used two ea., otherwise the front header hit the motor.
When I have time I am going to switch to the oem gaskets so my heatshields
will fit. Check the fit the S/E are half the thickness of the OEM.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.