[Dave Golder]

I just purchased a Paul Yaffe Original Bike that comes with a TC88B Motor with a big bore kit. "95". The bike has no tach so I was wondering what the stock TCB Motor redline is. I think from what I have read it is 5800....and if so would I gain anything going with any of the screaming eagle coil and 6200 RPM kits. Also if I do that which one would you reccomend.

The bike has crack pipes on it so it looses tons of torque but will still outrun a 03 Softtail with a regualr bore motor so I am just loooking for advice on what else to do,

Thanks

 

[2DEUCE]

It should help a little, allowing you carry each gear just a tad bit longer