V-Twin Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
This is my first time here and maybe someone can help. I'm in the process of restoring a 77 Low Rider and I've run into a problem with the speedo drive. When I got the bike the speedo didn't work due to the fact there was no cable and no where to hook it to. The tranny is a late 77 model I think, and there is no opening to run the drive gear there so I thought I'd run it from the front wheel. No problem right. Well, the flat cut for the drive gear on the front forks is on the right side (facing forward). I can't seem to be able to find a drive made to run off of that side. I've talked to many shops and many old timers and no one seems to be able to help.

Any advice would be greatly appreciated
Mark
 
1 - 1 of 1 Posts
Top