V-Twin Forum banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
3,145 Posts
I have an efi bike so don't have the petcock issue.
I do have 11/16" Autolite plugs. I use a standard 3/8 drive
socket with no problems. If the socket is well onto the plug
you won't break the insulation. You might have to put the
socket on first then attach the ratchet.
Also, I think using a tq wrench on spark plugs is overkill.
You should be able to develop a feel for it. Use the tq wrench on the
plug you can easily get to then loosen it by hand to get the feel.
It's only finger tight plus a 1/8-1/4 turn or so.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top