V-Twin Forum banner

Slide modification

1004 Views 1 Reply 2 Participants Last post by  HIPPO
Hey everyone,
I followed the nightrider.com steps for the CV carburetor modifications, and everything has gone very well. I will be re-jetting today (parts store was closed yesterday).
I was wondering if I need to do the modification to the slide (drill the vacuum port hole to 1/8") or not? I do not really know what I will gain or lose by doing this step.
Any help will be appreciated.
1 - 2 of 2 Posts
Don't. That's some of the info that is obsolete. If you want the slide to raise quicker use a spring from a CV44.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.