V-Twin Forum banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
426 Posts
"Also, with relation to the Decel Enleanment, up until the 32 degree box, it's set to 0.00. When I first take off, the bike has a nice backrap when shifting gears, even at low RPM. As it warms this goes away, I would like to keep it. Can I lower the other temp. ranges back closer to 0 to achieve this?? What will this adversely effect if anything?"


Uhhh, you're asking how adjusting the Decel Enleanment table affects acceleration? Or when you say "When I first take off" do you mean "taking off the throttle?"

Setting the whole Decel Enleanment table to 0 is one way to reduce or even eliminate popping at idle throttle when slowing. Setting them all to 0 won't hurt anything, all you are doing is adding a touch of fuel at/near 0 throttle position. It should have little or no affect when up-shifting.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top