V-Twin Forum banner

Security System Indicator Lamp

2K views 6 replies 4 participants last post by  stevep1590 
I have disconnected the battery on my bike numerous times and the security system hasn't armed itself once the battery is reconnected. However, the fob (you should have gotten 2 of them) sets and unarms the silent security system. You can purchase the siren to go along with it for additional $$$. Anyway, check with the dealer for the lack of the keyfobs and ask them what the security code is for your bike. The system can be unarmed by utilizing a specific sequence of turn signal button pushes on both left and right hand side. However, you need your code in order to unarm it. Once unarmed you can change this manual code to one of your own. The dealer can give you the specific rundown on how to do this (if not explained in the manual) when you call for the code. The security code is a 5 digit #. Usually comes from the factory set as 1-2-3-4-5. You might try this first.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top