[HDWRENCH]

Make sure you get with Bean on the head porting. These are nothing more than air pumps i do not think you will hit your mark with stock size valves. With a port street head and stock valves the 100 hp mark is like a wall, some will get right to it and stop just short. I see one or two that have broke the 100 mark , Just did a street port with a 103 kit it made 98 and 110. A 1.9 intake valve would have pushed the power up a few. You got the pipe to make the power add the andrews 54 cam and it will hit the mark. Set compression at 9.8-10.1 .

 

[HDWRENCH]

Agreed on the hp number tq is where it is at. As for the bigger rockers not sold on them. Buy the cam you need I dont think adding that small amount of extra lift is going to help you at all. Have seen a few dyno sheets with them and they are not doing any more than what we have seen without them. Just extra money spent.