V-Twin Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
98 Posts
I had a cut down 3/16 allan which I used to remove the rear bolts. I changed them for 1/4 20 hex and ground an old 12 point box end to fit in the depression on the rocker box cover... never messed with the engine mounts. Removing the stabilisers would make it easier to move the engine to the left...not sure whether or not it'll help though..
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top