V-Twin Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
9,150 Posts
It looks to me like the emblem on the road glide serves the same purpose as the one on my '05 King. It hides the flush head bolt that secures the fender to the muffler/saddlebag bar. The emblem is stuck on with 2 sided tape.

I used heat and some goo gone to get mine off. You still need to cover the flush bolt, but if your license bracket is like mine (bolts into the turn signal bolt holes and hangs under the tail light) you can get some new 3M two sided tape and just move it down to clear the license plate bracket and still cover the flush bolt.

Take a look at the link below and see if your bracket looks like mine.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top