V-Twin Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1 (Edited)
Have a 99 FXDX. I want to be able to start and run the bike with the key in the ACC position without the headlamp coming on. Is there any way to do this without destroying the switch. The back of the ignition switch has 3 wires attached covered in a resin. The back cover of the switch is fastened with what look like 2 rivets that would have to be drilled out. Is there an easier way. Thanks in advance for any help at all.
 
1 - 1 of 1 Posts
Top