Repair Manual for '99 Sportster 883
Join the discussion
Recommended Reading
-
95" Big Bore kit - what's the compression?
Twin-Cam EngineThere are so many threads about 95" kits/upgrades that I hesitate starting a new one, at the same time I didn't want to hijack someone else's. Hopefully, a simple question that some one will know about. What is the compression ratio obtained with the standard 95" big bore kit ('05 P&A book...- 9
- 7K
-
Lifter roller disintegrated, what now?
Twin-Cam EngineSo had a hot piece of garbage known as Jim's Powerglide II lifters completely fail. Scored the oil pump. Engine is a Jim's 131" made it about 5000 miles. Tear the entire motor down or do as much as possible to clean it out and run it?- 35
- 763
-
Twin cam starting rough when motor is hot
Twin-Cam EngineHello, Recently my 07 FXD has developed an issue where it starts rough when the motor is warm. Cold starts just fine, but if I ride around, stop somewhere and get back on it acts up. The motor sounds like it’s trying to turn over but won’t and eventually backfires. If I roll heavily on the...- 6
- 553
-
mbovard693 · updated
-
Twin cam 88 severe oil leak from air intake
Twin-Cam EngineThis is my first post on this site I’ve looked everywhere all over the internet to find an answer or solution. So here is the problem the bike has the proper amount of oil in it. I then proceed to start the bike and it does so within 3 to 5 seconds but then once running (at an idle) it dumps oil...- 14
- 407
-
S&S engine realiability
Twin-Cam EngineAs in Title. I wonder about S&S engines realiability.My old Evo engine (stage 1) in FXR is in good shape (15 years and something over 38k miles) but it is just too slow. So I decided to buy new engine, Stock Evo from HD will be around 3k$ (black & chrome) but the performance gain will be litte...- 29
- 61K
Join now to ask and comment!