V-Twin Forum banner
1 - 1 of 7 Posts

· Premium Member
173 Posts
Discussion Starter · #1 ·
This winter, I am going to upgrade my 05 FLSTNI's chain Tensioner system to the roller chain setup. Bike is stock bore, K&N filter with Cycle Shack slip-ons. I haven't decided on bumping up to 95ci, but if I do, it will be later when I can afford it and I will probably do the heads at that time. Reason I am doing the roller chain is simple. At 50kmi, I have avoided the dreaded cam tensioner shoe issue but I am not going to push it either. I was going to put the Baisley spring in but decided, hey, go for the new pump instead. Typical ride about 70%Solo, mostly Highway 70 to 80 % of the time at avg speeds of 60 to 70 mph. Bike runs well, just looking for more punch when I hit the gas while rolling along. Am thinkng of the Andrews 21N or the 26N cam. Would like to hear from someone with a similar setup. Opinions welcome. Thanks.
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.