V-Twin Forum banner
1 - 4 of 4 Posts

·
CBA Member
Joined
·
59 Posts
Discussion Starter · #1 ·
Ok I have just recived my order for my 95 build.
I open the boxes and have found that I now have a set of
S/E Hi comp pistons instead of the flat tops I thought I
had ordered. Problem is I have an 02 bagger and have been running
the andrews 26g cam and have been told that the came wont work well
becouse of a compression issue.

So I called a friend at a local HD dealer and he told me to run it.
He told me put the pistons in and injoy the ride.

So what gives. Do I put them in and hope for the best, Or get the
flat tops and hold the Hi C, for another build.

Help:unsure:
 

·
CBA Member
Joined
·
59 Posts
Discussion Starter · #3 ·
I have a set of 06 heads and was thinking of putting .030 head gasket.
But at this point Im stuck. Looks like I need to get some flat just to be safe.
Any one else, Please chimm in...
 

·
CBA Member
Joined
·
59 Posts
Discussion Starter · #7 ·
Well I went to the steeler today and picked up a set of flat tops.
I feel this was a good thing to do. I didnt want to try and screw with
the bike and (run it) as my friend said.

I have posted many questions on this site and have always come out the better with the info I recive from all of you. I just wanted to say thanks
again for the help.

If any one needs a set of 1550 pistons, Make me an offer.
I won't need them any time soon. And I dont want them sitting in my
shop. You can email me at "[email protected]"

The part #22868-00 New in box.

Thanks again.
 

·
CBA Member
Joined
·
59 Posts
Discussion Starter · #8 ·
Well I have a winner on the pistons if he emails me back. And the bike
runs great with the flate tops. I just closed it all up last night and took it for a quick ride and no leaks, no noise and all runs great.
After a few more short runs it should be good to go.

Then its Daytona bound.......~!Awesome! ~!Awesome! ~!Awesome!
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top