V-Twin Forum banner
1 - 1 of 54 Posts

· Registered
2,995 Posts
Try a manual impact driver. Cheap and something you should have around. Don't use air or electric one
The other option is try to loosen it with a tap on the edge of the head with a screw drive to loosen it. It it was locited a few good raps head on often lose it some.
If all else fail drill the head off carefully once cover is off it will often comes out real easy.
If your torx is stripped a bit try hammering in the next larger size.
1 - 1 of 54 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.