V-Twin Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
413 Posts
Fourcats said:
Check the adjustment for the pipes at the hangers under the bags, see what you have there.}
Also note that you should be able to center the muffler slides within the hangers, once you’ve loosened the muffler clamps such that the mufflers can be adjusted. Sometimes they don’t want to move easily, so it may require dismounting them from the hangers so that you can attempt to rotate and slide them to where they need to go. I don’t know how a silicon treatment might add to your difficulties, but I shouldn’t think it necessary to reuse if you find any used there.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top