V-Twin Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
83 Posts
Tight Fit

I installed the H-D rocker box oil gauge some time ago. I have stock head pipes, and was able to get an adjustable wrench in there to remove the oil sender, it was a tight fit. I then installed the t-adapter, and re-installed the sender/switch.
Not sure how much room you have with aftermarket pipes, good luck.

P.S. My oil guage blew the plug, and glycol went everywhere, I took the whole thing off, no gauge at this time.

MW
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top