V-Twin Forum banner

1 - 5 of 5 Posts

·
Who Really Cares...
Joined
·
38 Posts
Discussion Starter #1
I'm not familiar with the TC88.

I would like to put on an Oil Cooler but I'm not sure what I need besides the Cooler itself.

There are 2 pipe plugs located right next to the filter. Can I get pressure and a return there or do I need an adapter between the block & filter?

Thanks.
 

·
Hellbound Train
Joined
·
5,595 Posts
Billman said:
There are 2 pipe plugs located right next to the filter. Can I get pressure and a return there or do I need an adapter between the block & filter?
No, those are casting plugs
 

·
Infidel
Joined
·
6,331 Posts
Billman said:
I'm not familiar with the TC88.

I would like to put on an Oil Cooler but I'm not sure what I need besides the Cooler itself.

There are 2 pipe plugs located right next to the filter. Can I get pressure and a return there or do I need an adapter between the block & filter?

Thanks.

Billman,

You definitely need the service manual for your bike, parts book too. And if you're flush, pick up the electrical daignostics manual. Order them from a 20% off dealer.

Check out this link about turning your crash bar into an oil cooler: http://silvercrow.com/performance/oilcooler.htm

There have been lots of posts on oil coolers, give the search function a try.

You might also look through the threads in the Oil & Lubrication forum.

regards,

wyo
 
1 - 5 of 5 Posts
Top