V-Twin Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
206 Posts
Hey Classic 1550, With what your doing the only other thing I would suggest are a set of andrews 26 geardrive cams. They are great for heavy bikes with good low end torque for two up riding. The gear drives will get rid of the poor quality cam chain tensioners and give you years of reliable service. Keep it simple and you will save money and enjoy riding. All the big bore kits are wasted unless you get into head porting and all the tuning. Good article in recent issue of American Iron explaining this. Good luck and enjoy the ride.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top