V-Twin Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
103 Posts
My 2002 FLHT has had this as an ongoing problem with increasing frequency. A couple hours ago I pulled the connectors from the switch terminals and shot some electrical contact cleaner on all four surfaces and reconnected them and have a neutral light again. The connectors were a bit of a loose fit so I gave them an extra squeeze with the pliers and they now snap on. Now to see if this is a long term cure?

Now a couple days later and you can forget this as a fix, the problem is fully back. Checked with a VOM and the bulb and wiring check out OK, but the switch itself gives varying readings (it is supposed to be normally closed) it was rather loose so tightened it but the problems persist. Will put this on my warranty "to do list".
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top