"cams he designed" ? Any imfo on these cams?

 

"cams he designed" ? Any imfo on these cams?[/QUOTE

John ( Torque Inc. ) has these custom ground to his specification for my 124 build

611 / intake 19.5 open 47.5 close
575 / exhaust 57.5 open 13.5 close

My compression is 10.5 static 9.4 corrected

 

Got my first 30 mile break in and I have a really strong 124" that is just wanting to run!!! It was tough to restrain myself from going over 2800 rpms on this first round of riding. Going to drain the first round of break in oil and ride some more

John ( Torque Inc ) has hit a home run with his head work and custom cam design. Thank you John!!!

Here is my build

S&S 124 with -10.9cc pistons
HD bathtub heads set 85.5cc 1.99 intake / 1.61 exhaust
Heads flowed to match my HPI 58/58mm TB
Custom ground cams 611 intake / 575 exhaust
Engine compression static 10.52 corrected 9.4
V&H Power Dual head pipe customized to fit my 2008 trike
CVO Mufflers with Fullsac 2.25 baffles ( Love the mellow sound they make )

 

Excellent news! I'm glad its all together, and that you are liking it. I'm anxious to see the dyno.

 

Very exciting, I built a 107 with 120hp and 110tq and the only thing wrong with it is that it's not a 124! Just starting to tear it down and go your route.

 

A short video I took with my phone of my trike idling in the garage

 

sounds sweet!

 

that sounds amazing! damn John!....

 

Wow, that sounds good! Guess it's time to start on mine.


Sent from Motorcycle.com App

 

Ya know aside from the cam,that exhaust sounds kinda good,most trikes just don't sound right....and I am not sure how to describe it.

Best part is Tom fabbed up the whole thing himself and did a damn fine job for not having a lift and all....very cool

 

Thank you everyone and thank you John. My un-scientific test using the back of my hand lol, it feels as though I have equal exhaust flow. I think what helped was eliminating the hump on the left side exhaust a trike would have. Also the Fullsac baffles give it a geat sound.

 

You welded this yourself?! Get some close ups! My hats off to you Sir.

 

I had a buddy do the welding for me. I just tacked the new sections in place using my neighbors tired little mig welder that wasnt cooperating.

 

That sounds bad ass!

 

Thanks. John ( Torque Inc ) designed the cams Im running !!thumbs

 

What size primary tubes do the V&H powerduals have? Looks like a nice setup for a trike.

 

The primaries are 1.75 dia I got a deal on a slightly used pipe. Plus Mike Roland says he tested this head pipe with crusher mufflers and can support up to 140hp.

 

Great info, thanks. I'm guessing the 1.75" primary's will put the torque right where you want it for your application. ENJOY!

 

I'm starting to think your set up will make a nice retirement gift to myself in a few years as my ankles and knees are shot to sh*t. Great job Tom.

All the best,
Dave

 

Thank you for the kind words