V-Twin Forum banner

mounting a tour pack

2K views 3 replies 2 participants last post by  High Center 
Tour Pac Mount

I have a 1987 Electra Glide which I routinely remove the tour pac and replace it with a 4 rail luggage rack (to give it that Road King look).

The tour pack mounts to a flat surface with four bolts, and does sit rathe high as it is the backrest for the rear seater.

You shouldn't have any problem drilling the 4 railer and mountin the pac to that. I would however, install anchor nuts on the 4 railer to makr the job of install/removal easier. If you're not familiar with these, go to you local airport and talk to someone in aircraft parts and tell them what you're after.

Good luck,
 
It's really unbelievable. People roll down the window at a stop light and ask if they can take a picture.

It's a source of imence pride for me, particulaly when cars go by and toot the horn and give you a big thumbs up.

As for the price, I paid $2100 for it.

Cheers,
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top