V-Twin Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
23 Posts
Discussion Starter · #1 ·
Have a 1997 FXDL with Mid controls. As things would have it, gear foot shift lever and/or the stud where foot lever is connected rounded out in the middle of a ride, such that the lever will not "bite" into the stud for me to be able to change gears.

I am bit sure that both the stud and the foot lever rounded out, cause I can not feel the gearing or teeth on the stud and the lever.

while it would be pretty easy to replace the lever, i am completely stumped on how to replace the stud. The option is, of course, to have the thing machined, but i was thinking of just having the thing replaced for reliability. I looked at the Dyna parts catalog if i have to replac the shift lever (part no. 35621-90) or if i have to replace some other item.

i live in the philippines, and there is no dealer here who has available parts.

thanks....
 

·
Registered
Joined
·
23 Posts
Discussion Starter · #3 ·
gearing on the shaft also gone.....darn. shift lever rounded out also.

anyways, guess i will just have the tip machined.

good luck on your trip.... im from manila, but i know cebu is pretty fun place. you might want to try boracay and palawan.

thanks for the assist steve =)


dynalow97/monch
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top