Joined
·
24 Posts
have a 02 springer and want to lower it .an inch or 1.5. does anyone have any experience with WHITE bros. or progressive lowering kits. and what can be expected from a handling aspect.
lower springer
Join the discussion
Recommended Reading
-
TBR sounds aweful after 585 cams
Twin-Cam Enginehey guys Question I run a tbr and just did S&S 585CE cams My exhaust sounds crappy now. Its not deep and hearty like it used to be. Is this normal or did I do something wrong? Please let me know what info you need. The only thing I can think of that I may have effed up is the exhaust...- 19
- 299
-
DarkDyna16 · updated
-
2010 SG Oil pressure switch socket/ wrench size?
Twin-Cam EngineWhat is the wrench size of the oil pressure switch on my 20q0 SG. 1" too small and 1-1/16" sloppy...- 0
- 111
-
Jordan1200 · updated
-
Twin Cam B oil pressure gauge for under $50
Twin-Cam EngineAccording to Harley stealerships and the official service manual for my 2003 Softail, mechanical oil pressure gauge connection must be made by removing the oil pressure switch and plumbing a “T” fitting at the switch location. Of course Harley ( as well as any number of aftermarket retailers )...- 9
- 358
-
Smoke when starting hot
Twin-Cam EngineThis is my 1st season on my new to me bike 03 anniversary softail. Starts great, runs great, fun...but when I start it shortly after a ride when it is hot, I see some smoke under the tank and takes a few times to start. Then runs fine. Advice, tips, have you heard of this?- 6
- 249
-
Alison T · updated
-
Baker Drivetrain Sprocket mess!
Twin-Cam EngineHowdy y'all, Long time, no talk since I left Switzerland to return home in the USA. I have been lurking out here occasionally reading the board. Mostly busy re-building a new life and work. Gentlemen, my bike has been running pretty good since my return to the States once I re-tuned it for...- 16
- 544
-
Expat in CH · updated
Join now to ask and comment!