V-Twin Forum banner
1 - 6 of 6 Posts

·
Banned
Joined
·
21,644 Posts
Discussion Starter · #1 ·
Manual says to put a seal protector over shaft coming from tranny, when installing inner primary. Is there something else that can be used instead of buying HD installer? Should I just buy it?

I am guessing its is sleave that goes over shaft. You then slide primary on, and pull off sleave?
 

·
Registered
Joined
·
297 Posts
berserker said:
Manual says to put a seal protector over shaft coming from tranny, when installing inner primary. Is there something else that can be used instead of buying HD installer? Should I just buy it?

I am guessing its is sleave that goes over shaft. You then slide primary on, and pull off sleave?
I put tape over the splines and oil it up............Bill
 

·
Banned
Joined
·
21,644 Posts
Discussion Starter · #4 ·
nauipro said:
I put tape over the splines and oil it up............Bill
That sounds like it will work.
 

·
Premium Member
Joined
·
1,163 Posts
Beserker, please get that bike back together, the riding season is here.

Thorns
 

·
Banned
Joined
·
21,644 Posts
Discussion Starter · #6 ·
Thorns said:
Beserker, please get that bike back together, the riding season is here.

Thorns
Its been here off and on. Its killing me. I pride myself on not being fair weather biker too. GF bought me Gebring heated gloves for my birthday. At this rate won't get to use them until November. She will not be impressed.
 
1 - 6 of 6 Posts
Top