V-Twin Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
742 Posts
Discussion Starter #1
There is always a lot of talk about Flywheels slipping on the fourm. Fast starts and stops and so on. How about installing The Comp nut with an impact is there a chance of moving the flywheels.
 

·
Banned
Joined
·
5,114 Posts
I guess you could move the flywheels if you rattled the nut on with a 3/4'' or 1'' drive rattle gun but using a 1/2'' I'd say the worst you can do is knock the magnets loose in the rotor
 
1 - 2 of 2 Posts
Top