V-Twin Forum banner
1 - 1 of 1 Posts

· Premium Member
Joined
·
1,442 Posts
An aquaintence of mine traced the bar and shield pattern of his backrest insert to a template and transfered it to .125 sheet aluminum,cut it out with a scroll saw, cleaned up the edges with a fine file, finished with progressively finer wet-or-dry paper & water and finally Simichrome polish. Looks good and is quite unique! Leave a tab of excess metal to acommadate the mounting hole.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top