HELP setting valves
Join the discussion
Recommended Reading
-
Troubleshooting low performance, compression test results and whats acceptable
Twin-Cam EngineSo, Ive got two FXDX bikes. One, a 99, the other an 04, carbed, and both have comparable mods. The 99 has 37k miles, a Thunderheader, Big Sucker intake, stock pistons and SE 204 cams, and made 86 lb ft and 79 hp on the dyno. The 04 has 56k miles, a Supertrapp 2-1 with closed end...- 28
- 718
-
Lowering compression with gasket thicknesses
Twin-Cam EngineConverting my 88 to a 95 and the pistons I have are specific to my heads, so I'm not getting different ones, but they're rated at 10.5:1 compression which is a little more aggressive than I'd like for this particular bike. My question is how much gasket thickness should I use to get that...- 22
- 4K
-
Adjustable pushrods
Twin-Cam EngineI am sure this has been asked and answered s million times. Sorry in advance. What are the thoughts on these brands of quick install versions? Screamin Eagle Andrew's S&S Smith brothers? (Havf a set that can utilize the factory pushrod tubes apparently) Sent from my SM-G960W using Tapatalk- 19
- 272
-
Andrew's 48H vs Andrew's 57H for my 96"
Twin-Cam EngineWhat cam would work best in my 2010 SG stock 96"motor? A 48H or 57H The 48H max [email protected] rpm and the 57H 2200-5600rpm. I want a cam that comes on reasonably early. The 57H seems to come on a bit earlier and go out a bit further at the same time. What is it that I am missing here. If...- 4
- 184
-
Maybe dumb question
Twin-Cam EngineI recently purchased my first Harley a 2001 Fat Boy FI. Best bike I have owned. I want to start making some changes to fir my own style. One of the things I want to do is remove the dash panels and have them powder coated. Looks to be a pretty simple job to remove it and all the parts...- 4
- 158
Join now to ask and comment!