V-Twin Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Looking for some advice and help. I purchased V&H Quiet Baffles to replace the baffles in the Pythons I recently put on my 09 EG. I see the two screws in the back of the muffler and guess I have to remove them. Do I have to un do the "P" clamp as well? There appears to be nothing to "grab on to to get them out. I am looking for some advice- thanks.
 

·
Registered
Joined
·
582 Posts
Grab one of the vents on the inside of the baffle with some needle nosed pliers. Get a rubber mallet and bang on the muffle a bit while pulling on the baffle. Spray a little WD40 if id doesn't moved. With a little patience they will come out.
 
1 - 2 of 2 Posts
Top