V-Twin Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
1,168 Posts
Discussion Starter #1 (Edited)
Like new HQ 575 chain drive cams. $200 plus shipping. SOLD.
07 black Headquarters heads (softail) in mint condition with 13k on them. Manual releases included. Cleaned up ready to install. $600 plus shipping.
Darkhorsed 4.375 B crank with H beam rods. Timken bearings , spacers and races supplied. If conventional roller bearing to be used , just add the inner race. Runout same as when installed. 13k on it. $550 plus shipping. Rods alone cost 350.
SE 4.9 injectors. $100 plus shipping.
.005 over CP -7cc dished pistons with 13k on them. Perfect condition. $150 plus shipping.(SOLD)
5 Black Opps lifters with 13k on 4 of them. $100 plus shipping.
Ron
 

·
Registered
Joined
·
1,168 Posts
Discussion Starter #2
Crank now $500
Heads now $550
Ron
 

·
Registered
Joined
·
1,168 Posts
Discussion Starter #5
What diameter CP pistons? What stroke?

Thanks
Kleetus
Pistons are .005 over for the 4.060 cyls. HQ uses these to clean up the crappy factory bores from new. Stroke is 4 3/8"
Ron
 

·
Registered
Joined
·
1,168 Posts
Discussion Starter #7
are the injectors still available? what is the stock size?
I believe stock 96 came with 3.9. The ones I have are 4.9 . Sitting here beside me.:)
Ron
 

·
Registered
Joined
·
1,168 Posts
Discussion Starter #9
Pretty sure shipping would kill the deal on the crank?
Depends. I believe I originally sent it to Darkhorse from the post office for around 35-45 bucks.
If you really like getting hosed, use UPS.
Ron
 
1 - 10 of 10 Posts
Top