V-Twin Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
Dear members,

I just have installed the H-D alarm and siren system on my bike and I think the alarm is not working properly. If the alarm is armed and I shake the bike it blinks the lights and chirps the siren. The problem is that in order to get the continued 30 second alarm I need to shake my bike at least 4 or 5 times consecutively. Is this a problem or is it OK, since I heard that in the Softails when you shake your bike the 30 second alarm is immediately activated?
 

·
Registered
Joined
·
50 Posts
That is the way it works, small movement = short alarm & it will not keep going off in cycles, large movement or tamper = long alarm & it will keep going off in cycles.
 
H

·
Guest
Joined
·
0 Posts
You can adjust the sensitivity. The process is in the owner's manual. Let me know if you don't have it.

Harris
 
1 - 4 of 4 Posts
Top