V-Twin Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
106 Posts
Discussion Starter · #1 ·
Hello all, what would happen if I put a 57 Evo cam into a stock motor?

How about an 11 cam?

thanks
 

·
Registered
Joined
·
2,300 Posts
In the old days when we put cams into otherwise stock EVO's and used SE cams the best one was the SE3, personally I liked the Comp Cams 3010.
 

·
Premium octane member
Joined
·
7,381 Posts
i have used andrews ev-27 with good results in the past. It worked good with a/c and exhaust upgrades.........my .02
 

·
Registered
Joined
·
2,044 Posts
TXCHOP said:
i have used andrews ev-27 with good results in the past. It worked good with a/c and exhaust upgrades.........my .02
My choice as well :)
Too much cam will not perform well in a stock motor even with exhaust and intake upgrades.
I ran an EV-27 in my FXRS with 10:1 pistons and Baisley heads , it was still plenty of cam.
The thing ran like a scalded dog :Banadance
 

·
Registered
Joined
·
487 Posts
the se 54 works well and the se 1 the very early SE 2 cam was the best of the whole lot
 
1 - 5 of 5 Posts
Top