V-Twin Forum banner
1 - 1 of 4 Posts

· Registered
197 Posts
Try Drag Specialties. I bought a set for my 02 FXDL, but don't remember the model number.
I do have to admit, they were sort of a pain in the ass. I had to remove the stock turn signal spacers (which I thought looked pretty good), and install the supplied hollow studs. This required running the wires for the turn signals through the new hollow studs, which means you either cut the wires and splice them back together, or unplug (unpin) the wires and re-route them.
Good luck if you decide to go this route. Just my $.02.
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.