V-Twin Forum banner
1 - 1 of 1 Posts

· DHARMA Initiative
5,036 Posts
Definitely get new bars. The best way to reroute the wiring harness is to pull the dash and remove the wires from the connectors using a pin extractor and reroute your wires thru the bars. Then reconnect the pins in the proper holes in the connector.

If you need extra lenght for your wires, you can spice the wires under the dash and re-solder for a cleaner installation. Use heat shink tubing after you solder to keep the wires from being exposed and cover with another "sheath" if you have one.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.