V-Twin Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
52 Posts
I recall seeing one post on one of the boards about someone having problems with the cometic .030, with leaking. I think he went through a couple of sets, and then switched a thicker gasket, and didn't have any more problems. But moreover, I was told that the optimum squish area was about .035 to .040, and, that over time there's some carbon build up in the squish area, such that the .030 really gets a little too thin. Other than that, everyone really seems to recommed the .030.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top