V-Twin Forum banner
1 - 3 of 3 Posts

·
Premium Member
Joined
·
141 Posts
Discussion Starter · #1 ·
Just a quick note for information

I read several threads about adjusting the clutch that referencedusing an 11/16" wrench on the locking nut. Not sure when this might have changed, but my 2006 is actually 17mm. If someone tries to use an 11/16 wrench on this to crank it down, they will round off the nut.

FYI
 

·
Doing time, behind bars!
Joined
·
1,480 Posts

·
Registered
Joined
·
1,178 Posts
khollister said:
Just a quick note for information

I read several threads about adjusting the clutch that referencedusing an 11/16" wrench on the locking nut. Not sure when this might have changed, but my 2006 is actually 17mm. If someone tries to use an 11/16 wrench on this to crank it down, they will round off the nut.

FYI
Easiest way to know for sure is to look up the part number in the back of the parts manual (hardware section). On my 2005 FXDI it is 11/16 and the torque applied to the nut is quite modest.
 
1 - 3 of 3 Posts
Top