V-Twin Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
541 Posts
Discussion Starter · #1 ·
Been getting ready to pull the comp assy and the clutch, (primary assembly) to install the 3.37 gearing. Have the 1 1/2" socket. Having trouble locating a 1 3/16" over the holidays.

Is there anything special about the 1 3/16" socket from a depth or diameter standpoint to get at the nut inside the basket assembly? Haven't heard anybody mention it, but a few of the guys that I ride with have noted that there might be. Want to get this done.

Thanks, and Happy Holidays to All!
DLR
 

·
Registered
Joined
·
541 Posts
Discussion Starter · #3 ·
I'm confused...(Probably my fault), but is it a 1 3/16" or a 13/16" socket..? I thought most of the guys on here had reported it as a "1 3/16" socket.. Will pull the clutch adjustment retaining plate tomorrow and find out for sure.
thanks,
DLR
 

·
Restless
Joined
·
1,672 Posts
If you can't find one at Sears, your local Napa should have one.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top