V-Twin Forum banner

1 - 8 of 8 Posts

·
Premium Member
Joined
·
253 Posts
Discussion Starter #1
G'day rodders
I have a Blackstone TEK rear wheel to suit a 2006 V Rod (18 x 5.5).
I would like to convert this wheel to 530 chain drive, any headsup on who might be able to provide a kit or parts to achieve such a thought?
Cheers from downunder and hope ya New Year has started well
Stix
 

·
Registered
Joined
·
646 Posts
Your current rear wheel setup use the stock cushdrive still?
 

·
Premium Member
Joined
·
253 Posts
Discussion Starter #3
The wheel is new and will not be fitted into a Rod as such, I do not have the Cush basket at this stage, willing to get one if needed.
Direct to hub is a thought I'm having, just wondering what's out there??
 

·
Registered
Joined
·
646 Posts
Both are available. I did a solid adapter when converting mine and a S/E.
I think its VMod that offers the cush hub adapter.
 

·
Premium Member
Joined
·
253 Posts
Discussion Starter #5
Any hints as to who over your way can supply a direct to hub conversion,have emailed PMFR (no reply as yet) and am thinking about talking to Tim Doherty, although my last experience with DM was not favourable.
Thanks for your help
Stix
 

·
Registered
Joined
·
646 Posts
Is your preference using the cushdrive or a direct bolt on?
 

·
Registered
Joined
·
646 Posts

·
Premium Member
Joined
·
253 Posts
Discussion Starter #8
I'm happy to use either, but as this is a custom install I need some ability to possibly adjust offset. Direct to hub could possibly allow for machining or extra spacing.
Cush drive adaptor could be spaced but unsure if machining down is an option.
Once again thanks for your help.
 
1 - 8 of 8 Posts
Top