V-Twin Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter · #1 ·
I have a full BRANCH 95" kit pulling 100 H.P and 92 TQ. I would like to drop a more radical cam into this set up and pull some better numbers. I like the bike to pull like a frieght train and for it to do so from around 3000 RPM's thru 5000 or so....

I am looking towards Woods, anybody have any advice?
 

·
07', 04', 03', & 02
Joined
·
1,099 Posts
Woods TW-6HG

Andrews has a new cam that will hit the market soon called the 32G; same timing specs as the 31G but the lift goes from .510 to .575
 

·
Registered
Joined
·
1,700 Posts
Give Bobby Woods a call , he's very thorough about recommendations.
I have a 31G and it pulls very well from Idle up , with a .575 lift it would be similar to Bob's TW5G .
 
1 - 3 of 3 Posts
Top